Electromotive problems....

[Fisystems at aol.com]

In a message dated 12/30/98 8:23:53 AM Pacific Standard Time, CEIJR at aol.com
writes:

<< I have encountered intermittent problems with an Electromotive TEC II in a
 couple of instances. Each time, the ECU has completely lost its place and
shut
 down because of spark wire interference with the pickup lead from the crank
 trigger. After being sure that installation gives maximum separation, the
only
 problems have been with "low resistance" wires. Best results have been with
 street rf suppression wires, where the ECU has been rock solid. It is
 predicted that those won't last as long as some others, but they have worked
 better than more expensive spiral wound, etc. 
 												Charlie Iliff >>
Electromotive has a new pickup to correct this problem. 
Ken