FI system opinion?

[Bruce Plecan]

-----Original Message-----
From: Aaron Andrews <aarona at fea.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Thursday, January 07, 1999 7:47 PM
Subject: Re: FI system opinion?

How about a Haltech E6GM, uses all gm stuff, list was 695 for the ecm
and software.
Bruce


>What we are looking for is a solution to a 1.3/1.6ltr TBI injection system,
>and or 1.3 Twincam MPI injection system. Something that can be
preprogrammed
>and setup as a kit. I have found this solution to the Twincam mpi and that
>seems to work. The deal is that WE HAVE to go distributorless because of
the
>firewall (cam/disty run into the firewall and have to pound it out) This
>application is for Suzuki Samurais/Sidekicks.
>
>Aaron
>
>
>----- Original Message -----
>From: Bruce Plecan <nacelp at bright.net>
>To: <diy_efi at efi332.eng.ohio-state.edu>
>Sent: Thursday, January 07, 1999 3:22 PM
>Subject: Re: FI system opinion?
>
>
>
>-----Original Message-----
>From: Aaron Andrews <aarona at fea.net>
>To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>Date: Thursday, January 07, 1999 6:13 PM
>Subject: Re: FI system opinion?
>
>
>>Do you know of a cheaper easier to use solution?
>
>Solution to what?.  What application, what are you doing?.
>Bruce
>>
>>
>>----- Original Message -----
>>From: Jemison Richard <JemisonR at tce.com>
>>To: <diy_efi at efi332.eng.ohio-state.edu>
>>Sent: Thursday, January 07, 1999 12:56 PM
>>Subject: RE: FI system opinion?
>>
>>
>>Pricey!
>>
>>Rick
>>
>>> -----Original Message-----
>>> From: Aaron Andrews [SMTP:aarona at fea.net]
>>> Sent: Thursday, January 07, 1999 2:31 PM
>>> To: diy_efi at efi332.eng.ohio-state.edu
>>> Subject: FI system opinion?
>>>
>>> Just wanted to get anyone's opinion on the Racetech SDS FI System that
is
>>> a
>>> complete programmable system
>>> for $650, add $350 for a distributorless ignition and engine management
>>> system?
>>>
>>> TIA
>>> Aaron
>>
>>
>
>
>