Delco 639

[Stuart Bunning]

Some of the new DELCO's use flash rom's soldered directly to the board.
If this is the ECU I am thinking of it may have a space on the PCB where a
connector could be soldered to about half the size of the conventional
memcal socket. If you follow the traces on the pcb from this socket it
should go directly to the flash rom. If this is the ECU I think it may be
you can desolder the flash rom and solder in a socket/small adapter board
and use a convertional eprom. One of the daewoo's did this i read a magazine
article about.



 
At 11:33 PM 6/1/99 +1100, you wrote:
>Hi all
>
>Have any of you guys come accross a DELCO 16208639???
>they have no memcal......same size as a 165/808
>They come out od the 94 Holden Barina 1.4 Auto
>
>Justin
>
>


Best Regards,

STUART BUNNING
SALES ENGINEER
KENELEC PTY LTD

23-25 REDLAND DRIVE
MITCHAM VICTORIA 3132
AUSTRALIA

PHONE:  61 3 9873 1022
FAX:    61 3 9873 0200
EMAIL:  stuart at kenelec.com.au
WEB:    http://www.kenelec.com.au/