ECM connector cleaner

[Clarence L.Snyder]

Clarence Wood wrote:
> 
>   After chasing, for over a year, a stumble that occurs as boost goes over 5 lbs I had the remarkable encounter with a person who knew exactly what caused the problem.  Strange, how solutions to problems present themselves!
>   Anyway, he told me that the Nissan 280's have a problem with the ECM, or ECCS, connectors.  For some reason they become corroded and for some reason this causes a stumble.  He said that they, in his shop, pull the connectors and spray them with WD40.  Well, gasp!  Not trusting WD40 to the task I used CRC contact cleaner, worked the connectors in and out, and low and behold, the stumble disappeared!!!! (:>  ZM000000M
>   Now, what can I do to solve this problem???  Is there some chemical that I can use that will stop the corrosion?  I thought about removing the connectors and using connectors like on my computer, that could be locked into place by set screws.  This is a lot of work.  Surely there must be something that can be sprayed, that will do the job!

CRC makes a product for that purpose - can't remember the name. LPS 2
will do the job too. Even a silicone grease does wonders.