O2 bung brazing/welding?

[James Weiler]

ross, I got my bungs from Mopac (in Burnaby) for about $8 each.  I 
drilled holes in the collectors for the headers and had them Mig welded 
in place.
HTH
james


On Wed, 13 Jan 1999, Ross Corrigan wrote:

> I'm going to need an O2 bung installed in my exhaust right below my header,
> is this something I can just drill out my exhaust and 'braze' the bung on?
> I have no welding/brazing etc experience but wouldn't mind learning.......
> 
> gonna need it for my 4Di and EGO sensor I've rallied the parts for
> 
> thanks in advance
> 
> (not directly efi I guess but I'm sure you guys can answer this...)
> 
> PS still looking for a fine deal on a 486 notebook w/ modem and working
> battery...
> 
> Ross Corrigan  /  Vancouver, Canada 
>   IZCC#255          EZCC #45a    BCZCR        
> 1980 280ZX  w/ parts from '68,'86,'87,'95 Camaro, '66, '69, '82 'vette, 82
> 280ZX, '86, '88 300ZXT,  and more
> 68 327 9.5:1,  2830lbs dry, GTech times dropping steadily;^) 
> ICQ # 11549358
> http://home.iSTAR.ca/~zxv/index.shtml
> http://207.212.212.139/~corrigan/gearheads/pics/wheels/sirbg.jpg  'where a
> Z belongs'
>