O2 bung brazing/welding?

[Raymond C Drouillard]

On Thu, 14 Jan 1999 01:57:08 -0500 Shannen Durphey <shannen at grolen.com>
writes:
>I've been successful drilling a hole in the pipe/header large enough
>for the sensor portion of the O2 sensor, and welding an 18mm spark
>plug anti-fouler around the hole.  The anti-fouler needs to be cut
>short enough so the sensor protrudes into the exhaust stream.  If you
>find a source for more "professional" bungs, please post it.
>Shannen

You can get the bungs designed specifically for the sensors (they're
actually fairly thick) from Ramchargers (and probablly lots of other
speed shops), Summit Racing http://www.summitracing.com  and from Holley.
 If you buy the Pro-Jection kit, the bung comes with it.

Ray Drouillard

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]