Haltech E6GM

[Bruce Plecan]

-----Original Message-----
From: Charles Brooks <cbrooks1 at mail.tqci.net>
To: DIY_EFI Fuel Injection List <diy_efi at efi332.eng.ohio-state.edu>
Date: Friday, January 15, 1999 6:57 PM
Subject: Haltech E6GM

1,000 rpm for a 12,000 rpm capacity calibration, 500 rpm resolution for a
6,000 rpm calibation.  Meaning no correction over 6,000 rpm not
that the ecm wouldn't work at higher speeds.
Bruce


>I did a little reading through the archives and came across a post
>which mentioned that one drawback to the E6GM was that the RPM
>increments were 1000RPM as opposed to 500RPM in another system.
>
>Can someone explain the difference in operation and the effect on
>programming as well as driveablity?
>
>TIA,
>
>Charles Brooks
>