Haltech E6GM

[Bruce Plecan]

-----Original Message-----
From: Greg Hermann <bearbvd at sni.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Friday, January 15, 1999 10:47 PM
Subject: Re: Haltech E6GM


>>Is the E6GM capable of 500 RPM resolution? It's hard to tell
>>from the Haltech page, and the post in the archives didn't
>>elaborate. If so then I don't see any problem for my
>>application. Hhmm, seems like I'm trying to talk myself into
>>the Haltech unit, A 500 dollar difference is a persuasive
>>argument  :)
>>Charles Brooks
>Watch it--check the specs closely-- I think maybe the Haltech unit will
>only change injector pw 64 us at a time. Might be part of the old "you get
what you pay for" syndrome!
>Greg

The software reads one axis as milliseconds, and the increments
are (as an example)   4.032, 4.048, 4.064, 4.080, and 4.096.
Looks to be .000016, to me (course Doc always corrects me twice
when I start writing things with many zeroes, but he's out tonite).
Bruce
>>
>>
>>
>>Bruce Plecan wrote:
>>>
>>> 1,000 rpm for a 12,000 rpm capacity calibration, 500 rpm resolution for
a
>>> 6,000 rpm calibation.  Meaning no correction over 6,000 rpm not
>>> that the ecm wouldn't work at higher speeds.
>>> Bruce
>
>