TPI on a 406

[Charles Brooks]

One thing your going to need is a TPI manifold off of an 85 or 86 engine,
unless you're willing to do a little grinding on the four bolt holes in the
middle that hold the manifold to the head.

Charles Brooks




----- Original Message -----
From: <AJLegere at aol.com>
To: <diy_efi at efi332.eng.ohio-state.edu>
Sent: Monday, January 25, 1999 9:08 PM
Subject: Re: TPI on a 406


>Just a short comment on yr 'picked up'TPI.  I've gor an '87 TPI setup for
the
>exact same application.  The donor car was an '87 Firebird 350 with a '165.
>
>AJL
>