Prowler V6

ECMnut at aol.com ECMnut at aol.com
Fri Jun 4 11:54:52 GMT 1999


In a message dated 6/4/99 1:06:59 AM Eastern Daylight Time, bearbvd at sni.net 
writes:

> and he insists that
>  >the cast cranks flex less, resulting for more accurate
>  >spark/valve/combustion events from cylinder to cylinder.
>  
>  Betcha he is trying to run the forged cranks with a regular damper. Put a
>  good viscous damper on a forged crank and this problem goes away. The cast
>  cranks damp out the vibrations better, but they are _not_ stiffer!
>  
Hi Greg,
Either that or he is just trying to save a few bucks on cranks.
He uses use the ATI dampers. They run the ATI baseball hats too,
just to be safe.
Mike V.



More information about the Diy_efi mailing list