Injectors

David Cooley n5xmt at bellsouth.net
Tue Jun 8 16:18:17 GMT 1999


At 10:11 AM 6/8/99 -0700, you wrote:
>WOW DAVE!,
>
>Thanks for that ULTIMATE link about injectors!
>
>Couldn't ask for more info, I don't believe...
>
>Will be printin a LOT of that web site for referencing!
>
>'Preciate it mang!
>
>100 lbs. may work great at WOT, but this is a daily driver man, must
>have SOME sorta idle quality, even if at 1,200-1,500 rpm, dont want the
>surging idle that I've heard so much about when runnin too large of
>injectors...
>
>May just use some 70-80 lb'rs to begin with and go up from
>there...depending on boost, will start out at maybe 5 lbs. boost and
>work my way up from there, will already have the heads o-ringed, of
>course...


May want to use some 55 lb/hr injectors for good low speed idle etc, and a 
second set of 55 lb/hr injectors that come in above a certain TPS% and 
Boost pressure...

===========================================================
David Cooley N5XMT Internet: N5XMT at bellsouth.net
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================




More information about the Diy_efi mailing list