Subject: Not diy_efi....how to disable a computer carb

[Gary Derian]

The air bleed side is for the idle mixture since the idle fuel does not go
through the main jets.

Gary Derian <gderian at oh.verio.com>


> That's only part of it Don.
> When the solenoid pulls the needles down and closes off the jets it, also
> opens an air bleed valve to further lean out the mixture.
> Possible options are. Physically hold the needles half way in/out of the
> jets.  Or use a 555 as a base for a generating a 50% square wave, and
> disconnect the engine check light.
>
> Neil