Dual fuel PFI rails....

[Clive Apps Techno-Logicals 416 510 0020]

> 
> 
> 
> What about about completely moving away from the standard fuel rail type
> injectors and use the ones that take a straight hose fitting on the end.  You
> could tee 2 fuel rails to the top with just a Y-piece.  Place a solenoid between
> each rail and injector (yes lots of solenoids, how small can you get these
> things ?), however this would allow for two independent systems which could run
a small 1/2 psi or so check valve
in each half of the Y would prevent backflow and mixing as well

Clive