Subject: Not diy_efi....how to disable a computer carb

[ARoss10661 at aol.com]

In a message dated 6/17/99 4:51:51 PM Central Daylight Time, 
Don.F.Broadus at ucm.com writes:

<< That is a good fix also. My experience with the M/C solenoids is that the
 solenoid fails either open or shorted  coil so the part will need to be
 replaced anyway and that could be the only thing wrong and the C3 system
 might come back on line. >>


    I rebuilt the carb today, the float was trashed as well as the needle and 
seat.  I also found the TPS bad.  Replaced all and reinstalled and the car 
runs great.

Thanks for everyone's help

Al