Todd's sure fire blower sale - Fred,

Todd....!! atc347 at c-com.net
Tue Jun 22 15:07:32 GMT 1999


Good point Mike,

May need to run some sorta alcohol or water pre injection thru the
blower in order to cool the intake charge, ey?

Later....

Todd...

---------

ECMnut at aol.com wrote:
> 
> Hi Todd,
> Leaving out the issue of "HP req to run the blower",
>  If you pump 15 lbs of boost (at 400+ deg F) into a 440, she
> she prolly won't live long at all, on pump gas.  Check with BDS
> or other old timers for some helpful temp/flow boost curve data.
> The old GMC design makes lots of heat.  I've been digging for
> some old docs on the above for a "prepped" 671, and can't find
>  it anywhere.  BETTER YET, Carl Summers,
> (AKA the Whipplecharger man) are you out there?
> He is likely to have data from output temps for different blowers.
> Mike V
> 
> > Hpwdy Bill,
> >
> >  Just wanted to mention that if you pumped 15 lbs. of boost into say, a
> >  440, you will DEFINITELY be pushin WAY more than 100 hp, more like 400+
> >  additional....depending on the type of fuel being used....
> >
> >  Later....
> >





More information about the Diy_efi mailing list