Propane

[John_Warr-1 at sbphrd.com]

Ray wrote:

>The relief valve would have to stand up to the vaporizing propane, but
>the injecter would only see warm liquid at a 30 PSI pressure difference.
>What needs to be found is an injecter that is sturdy enough to withstand
>330 PSI without bursting.

330 psi.... that is about 22 bar in christian units. Surely, that is a
fairly trivial pressure in the diesel world, where 30 bar is " normal ",
and equipment works up to about 3 MPa.

IMHO


Y'rs &c



John Warr

'75 XJ-S...  can pass anything on the road... except a petrol station.