Which Intake

[Bruce Plecan]

-----Original Message-----
From: Greg Hermann <bearbvd at sni.net>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Sunday, March 07, 1999 10:37 PM
Subject: Re: Which Intake


Spend some time cleaning out intercoolers for a GN, and even post TBs
load up with oil.
  The best way of using turbos is with deisels.  No TBs.
There are aftermarket boost controllers using "High Speed Stepper Motors"
for dump valves, and even some using fuzzy logic.
  I can't imagine not being able to use a couple MAPS sensor fore+aft
of the TB downstream of the turbo, and control the intake pressure during
overrun.  Use a EGR valve or IAC, or something like that.
Bruce