Fuel tuning...

[David A. Cooley]

At 10:52 PM 3/13/99 -0500, you wrote:
>>I'm going by the O2 voltage readings... I know the Buick GN guys like to
>>shoot for 780-820mV at WOT, but not sure if that applies here or not.
>
>Be careful with those numbers they are from the old OTC equipment and
>those other
>scantools that are set up the same.  When read on a Diacom the reading
>would be
>about 890 to 930 . . .

So actually, the numbers I'm seeing, since calculated from the GM formulas
for this data stream, might be pretty close to optimum?
===========================================================
           David Cooley N5XMT           Internet: N5XMT at bellsouth.net
     Packet: N5XMT at KQ4LO.#INT.NC.USA.NA   T.A.P.R. Member #7068
       I am Pentium of Borg...division is futile...you will be approximated.
===========================================================