Shift light

[Ferman C. Lao]

Thanks, will see if I can do it.
-----Original Message-----
From: Falb, John <John.Falb at Unisys.Com>
To: 'diy_efi at efi332.eng.ohio-state.edu' <diy_efi at efi332.eng.ohio-state.edu>
Date: Saturday, March 20, 1999 1:34 AM
Subject: RE: Shift light


>
>Here is a design I have made and it works great. Fully adjustable from
>0-10,000 and more. It is a two stage design, each light is independently
>adjustable. I use two 10mm LED's one is yellow and one is red. I also only
>use 60 ohm resistors on the LEDs. I don't know what kind of car you have
but
>it should work with any aftermarket ignition with a tach output, or just
>about any newer car. (I think)
>
>I will make it for you for 80.00 plus shipping.
>
>But if you did it yourself it could be done for under $30.00 including a
>brand new soldering iron.
>
>http://www.geocities.com/MotorCity/Speedway/7415/shift.htm
>
>And you can get all you parts from here.
>
>http://www.digikey.com/
>
>Have fun!
>
>John Falb
>