EFI Intake Conversion (1 of 2)

[James Weiler]

This is essentially what I did as well.  Injectors strainght up, made my 
own bosses from 6061 tubing (27/32 O.D., why that size I don't know, may 
be it was supossed to be 7/8).  The holes I drilled in the intake were 
also 27/32.  I also wound up machining/grinding away most of the boss.
I finished to inside of the boss with a 14mm ream and lots of cutting 
fluid to make a smooth cut.

HTH
jw