MAF GM systems
andy quaas
realsquash at yahoo.com
Thu Mar 25 21:11:12 GMT 1999
Please explain what ECM you used (home-grown?). What do you think of
using a MAF system (OEM, lets say) on a 454 big-block or 431 mopar?
Thanks
Andy
--- A70Duster at aol.com wrote:
> Yes, I have. On a SBC TPI system. Using the HC11 as
> the controller. Had a
> problem with the MAF sensor. I've read in some GM
> manuals that the output of
> the MAF sensor is proportional to mass air flow. So
> I designed the system to
> handle a y=mx+b type equation, and had pots to vary m
> and b. And I had
> nothing but trouble. I could get a good idle, but
> poor mid and top end. Then
> I adjusted for top end and midrange and idle would be
> WAY rich. I finally
> flowed the MAF with an anemometer and behold
>
> Air mass varied as the square of output
> of the MAF sensor
>
>
> DOH!!!!
>
> So a little math fixed that.
>
>
> Mike
>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
More information about the Diy_efi
mailing list