AW: diy flow bench

[H Villemure]

Wayne,

I have a hard time finding those articles. Do you have them handy? In
PDF or anything? Or is there a site where to get them? I have an idea of
how I would design one, but I do not have much experience and could
spare a few hundred hours :) by reading about this topic.

Thank you,
<snip>

> 
> Matt,
>  If you are interested  in a diy flowbench  Popular Hotting had a two
> part
> story on building a very good flow bench. The articles were dated Sept.
> 93 and
> Oct. 93. I know it is accurate as I have built a 600 cfm version and am
> very
> pleased with the results. Cost was about  $700. Another style of
> flowbench was
> articled in Mopar Tech Special  issue #7. It would be cheaper but I
> don't know
> how accurate it would be.
> Hope this helps.  If you can't find the articles I would be glad to send
> you
> my drawing of the flowbench.
>                         TIA  Wayne

-- 
Helene V.
___________________
welcome to mk2 at onelist.com
visit us at http://come.to/helene-and-matti