Chip for Northstar

[Bruce Plecan]

-----Original Message-----
From: David A. Cooley <n5xmt at bellsouth.net>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Date: Tuesday, March 30, 1999 3:04 PM
Subject: Re: Chip for Northstar

Well, I hope your happy.  Grumpy, and Doc are both crushed.  They've taken
their
daily dose of Prozac, and are sleeping now.  They were fully prepared to
join forces,
and go to 5 new shiny pennies.  Well, so be the economic forces of the USA.
BTW, the docs prolly are out there.   Well heard a rumor that someone had
them.
Bruce


>Heck,
>Id do the copying expenses, postage, see your $10 and raise it $5 PLUS...
if
>I could find a GOOD OCR program that really worked, I'd digitize all of it!
>
>
>-----Original Message-----
>From: Bruce Plecan <nacelp at bright.net>
>To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
>Date: Tuesday, March 30, 1999 2:17 PM
>Subject: Re: Chip for Northstar
>
>
>>
>>-----Original Message-----
>>From: Mark Romans <romans at pacbell.net>
>>To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
>>Date: Tuesday, March 30, 1999 12:49 PM
>>Subject: Re: Chip for Northstar
>>
>>I'll go for coping expenses, postage, and $10.
>>Bruce
>>         Doc ain't got $10, but, has two shiny pennies
>>
>>
>>>Yes and if anyone has the northstar docs they ought to be about 1000
>pages.
>>>I would gladly pay the copying expense to get a copy too!
>>>Mark
>>>>Hi Chris,
>>>>The wheel sensors not being there may be the key...
>>>>There is a "Brake Torque" mode the PCM uses that cuts back timing and
>fuel
>>>>when it doesn't see wheel (or VSS) input but see's throttle/rpm etc...
>>>>The GM Cal Doc's are the actual calibration documents showing what
tables
>>>>etc are where in the chip.
>>>>VERY helpful for modifying code as you can flag it to say that the
>>>>ABS/Traction control isn't there.
>>
>>
>>
>