Chip for Northstar

[Bruce Plecan]

Is this from Melissa?
Bruce



-----Original Message-----
From: Gorden_Jennings at 3com.com <Gorden_Jennings at 3com.com>
To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
Date: Tuesday, March 30, 1999 5:47 PM
Subject: Re: Chip for Northstar


>
>
>Take a look at Recollect from Mindworks. Info. can be found at
>www.mindworks.com. Hope this helps.
>
>
>
>
>
>
>"David A. Cooley" <n5xmt at bellsouth.net> on 03/30/99 11:23:01 AM
>
>Please respond to diy_efi at esl.eng.ohio-state.edu
>
>To:   diy_efi at esl.eng.ohio-state.edu
>cc:    (Gorden Jennings/HQ/3Com)
>Subject:  Re: Chip for Northstar
>
>
>
>
>Heck,
>Id do the copying expenses, postage, see your $10 and raise it $5 PLUS...
if
>I could find a GOOD OCR program that really worked, I'd digitize all of it!
>
>
>-----Original Message-----
>From: Bruce Plecan <nacelp at bright.net>
>To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
>Date: Tuesday, March 30, 1999 2:17 PM
>Subject: Re: Chip for Northstar
>
>
>>
>>-----Original Message-----
>>From: Mark Romans <romans at pacbell.net>
>>To: diy_efi at esl.eng.ohio-state.edu <diy_efi at esl.eng.ohio-state.edu>
>>Date: Tuesday, March 30, 1999 12:49 PM
>>Subject: Re: Chip for Northstar
>>
>>I'll go for coping expenses, postage, and $10.
>>Bruce
>>         Doc ain't got $10, but, has two shiny pennies
>>
>>
>>>Yes and if anyone has the northstar docs they ought to be about 1000
>pages.
>>>I would gladly pay the copying expense to get a copy too!
>>>Mark
>>>>Hi Chris,
>>>>The wheel sensors not being there may be the key...
>>>>There is a "Brake Torque" mode the PCM uses that cuts back timing and
>fuel
>>>>when it doesn't see wheel (or VSS) input but see's throttle/rpm etc...
>>>>The GM Cal Doc's are the actual calibration documents showing what
tables
>>>>etc are where in the chip.
>>>>VERY helpful for modifying code as you can flag it to say that the
>>>>ABS/Traction control isn't there.
>>
>>
>>
>
>
>
>
>
>
>
>
>