Injectors & harness

Shannen Durphey shannen at grolen.com
Tue May 4 04:58:35 GMT 1999


Ok.  Then the 4.3W and the Syclone don't share injectors.  The W
engine has one injector connected to 6 poppet nozzles, each through a
hose.  Looks a little like a deformed spider.
Shannen
Bruce Plecan wrote:
> 
> ----- Original Message -----
> From: Shannen Durphey <shannen at grolen.com>
> To: <diy_efi at efi332.eng.ohio-state.edu>
> Sent: Monday, May 03, 1999 10:02 PM
> Subject: Re: Injectors & harness
> 
> The injectors I just bought out of a sy really look like the ones I put in
> the Buick GN fuel rails.
> Bruce
> 
> > Wait, there's a catch.  If this has the same injector as used in the
> > later 4.3l Vortech engine, it's got a different connector.
> > Barry, if the injector looks like a bug and is buried in the center of
> > a large, 2 piece manifold  you can find similar parts in Astrovans and
> > S-10s with the VIN W engine.
> > Shannen
> >
> > Bruce Plecan wrote:
> > >
> > > All GM TPI injectors use the same connector, as well as most ford.
> > > Pep boys might even have them.
> > > True Value does, but I don't have the number
> > > Bruce
> > >
> > > > I'm looking for a couple of injectors & connectors from a Syclone ('91
> GMC
> > > port injected 4.3) for setting up a test rig.  Does any other vehicle
> use
> > > these port injectors & matching connectors?  I'm not likely to find a
> > > Syclone or Typhoon @ my local wrecking yard.......
> > > > Thanks - Barry
> >




More information about the Diy_efi mailing list