Injectors & harness

[Bruce Plecan]

----- Original Message -----
From: Shannen Durphey <shannen at grolen.com>
To: <diy_efi at efi332.eng.ohio-state.edu>
Sent: Tuesday, May 04, 1999 12:48 AM
Subject: Re: Injectors & harness

Right, sy's use 6
Grumpy


> Ok.  Then the 4.3W and the Syclone don't share injectors.  The W
> engine has one injector connected to 6 poppet nozzles, each through a
> hose.  Looks a little like a deformed spider.
> Shannen
> Bruce Plecan wrote:
> >
> > ----- Original Message -----
> > From: Shannen Durphey <shannen at grolen.com>
> > To: <diy_efi at efi332.eng.ohio-state.edu>
> > Sent: Monday, May 03, 1999 10:02 PM
> > Subject: Re: Injectors & harness
> >
> > The injectors I just bought out of a sy really look like the ones I put
in
> > the Buick GN fuel rails.
> > Bruce
> >
> > > Wait, there's a catch.  If this has the same injector as used in the
> > > later 4.3l Vortech engine, it's got a different connector.
> > > Barry, if the injector looks like a bug and is buried in the center of
> > > a large, 2 piece manifold  you can find similar parts in Astrovans and
> > > S-10s with the VIN W engine.
> > > Shannen
> > >
> > > Bruce Plecan wrote:
> > > >
> > > > All GM TPI injectors use the same connector, as well as most ford.
> > > > Pep boys might even have them.
> > > > True Value does, but I don't have the number
> > > > Bruce
> > > >
> > > > > I'm looking for a couple of injectors & connectors from a Syclone
('91
> > GMC
> > > > port injected 4.3) for setting up a test rig.  Does any other
vehicle
> > use
> > > > these port injectors & matching connectors?  I'm not likely to find
a
> > > > Syclone or Typhoon @ my local wrecking yard.......
> > > > > Thanks - Barry
> > >
>