730 on a 406 small block

[The Punisher]

>Weight of car?, Auto/Manual tranny?, Final Drive Gearing?.
>Your running two. of the 4-barrel units?.
>Or two 2 barrel units.
>You want to start with the TBI, and then go port??.
>
3250 lbs aprox with driver, turbo400 trans with 2500-3000 stall converter. 
3.73 gears. dual 670cfm 2 barrel holley projections with 80 pound injectors. 
I already have all the TBI stuff (and it looks good on the tunnel ram too), 
but later I plan to weld up a new plenum top for the tunnel ram and go port.


>I think Arizonia Speed+Marine sell a remote IAC for GMs.
>If ya look around you might find a throttle body that has a bolt on IAC.
>Sneezy
OKay I'll check with AZM on that one, thanks. And I do have one rochester 
TBI unit from a 305 camaro, but I dont trust it much and I still would need 
to aquire another similar one. I'd rather just use the remote IAC, which I 
could also use later.

Thanks for the input.
The punisher


_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com