BMFC, Tiiming, and Coatings

[Programmer]

Ted,

It's been done in the past--I don't know if any real "dyno'd" results ever
made some publications, but
the best results wouldn't have made the extra work worth the bother.

Lyndon
-----Original Message-----
From: Stowe, Ted-SEA <StowT at PerkinsCoie.com>
To: 'diy_efi at efi332.eng.ohio-state.edu' <diy_efi at efi332.eng.ohio-state.edu>
Date: Saturday, May 15, 1999 12:40 AM
Subject: RE: BMFC, Tiiming, and Coatings


>here's a thought, has anyone ever given any thought to painting the inside
>of an engine ? before you hit delete, consider how easy it is for dirt etc
>to stick to the inside of the block, under a microscope the surface must be
>like velcro. I suspect oil would return a little quicker to the pan. just a
>thought, you can flame me now.
>
>-----Original Message-----
>From: Bruce Plecan [mailto:nacelp at bright.net]
>Sent: Friday, May 14, 1999 9:31 PM
>To: diy_efi at esl.eng.ohio-state.edu
>Subject: BMFC, Tiiming, and Coatings
>
>
>Has anyone run any "independent" testing on these barrier coatings for what
>they actually have seen as an improvement pre+post coating?.
>  Has any one run any endurance tests?.
>Do I need mention that this might need a complete recal to get right.
>Bruce
>