Limited cooling space

[Todd....!!]

I confir... Great idea Bruce, I'm thinkin about doin at LEAST one block
plate in my 440 Bee...  However I have a top and bottom radiator in it
now, that may hender this theory a bit...  Will be researchin this type
setup....

LATER!

Todd....!!


Bruce Plecan wrote:
> 
> Someone the other day mentioned having a very confined area for a radiator.
> I just recalled one way of "helping".
> It involves dividing up the radiator so that the coolant rather than just
> going from side to side has to criss cross the radiator several times.
>   This is done by adding several barriers internal to the side tanks.  On
> the "cold" side of the radiator a divider plate is installed 2/3 of the way
> down from the top, and on the hot side, a divider is added 1/3 of the way
> down, so the coolant has to travel back and forth 3 times rather than once.
>   If your out for the gold, you might have to play with the water pump
> speed, some
> Grumpy