[Chad Clendening]

The 2 piece systems have the the   6803 .  I bit simpler than the HC11.  No
divide or bit set/clear commands and no Y register.

The SMEC's look to have a HC11A, 52 pin PLCC type.

Chad


"David A. Cooley" wrote:

> At 09:16 PM 5/26/99 -0400, you wrote:
>
> >They are 2764 PROMs (8kx8).  This ECM has one that says "FED" on one, and
> >"5226263" and "5226611" on the other.  One number is the same as the ECM PN.
> >I got both PROMs out w/o damaging the board. The PROMs are read and
> >disassembled, and a schematic is pretty well laid out for the hardware.  You
> >will NOT
> >be able to figure out the code without a schematic for the hardware.  Pretty
> >clever
> >those mopar guys......
>
> What kind of CPU do the MOPAR computers use? HC11 based?
> ===========================================================
>            David Cooley N5XMT           Internet: N5XMT at bellsouth.net
>      Packet: N5XMT at KQ4LO.#INT.NC.USA.NA   T.A.P.R. Member #7068
>    Sponges grow in the ocean... Wonder how deep it would be if they didn't?!
> ===========================================================