DIY_EFI Digest V4 #631

[Gary Derian]

It could work as long as you had external drivers for the injectors and
synchronized the throttles to work together.

Gary Derian <gderian at oh.verio.com>

> The fellow that did my rad is looking at making his 440 efi.  He likes the
> idea of going port injection.  He has the equipment to mach injector
bosses
> ect.
> Now he also has a 6 pac intake.  We were thinking maybe he could mount 3
Tpi
> TB and run a linkage with a TPS on one of them and IAC  probably on the
> center TB.  Using a mod gm fuel rail.  Any other ideas?  What kind of ECM
> would work good in this application?  Has there been anything done with
> mopar motor and gm port injection..  Any info pointing me/him would be
> greatly appreciated.  Also has equipment to make alum intake, ie could mod
> mopar intake to run Tpi runners and plenum?  Methinks not enough flow for
> 440.
> Mike Rolica
> EXT. 260
>  :-)
>
> ------------------------------
>
> End of DIY_EFI Digest V4 #631
> *****************************
>
> To subscribe to DIY_EFI-Digest, send the command:
>
>     subscribe diy_efi-digest
>
> in the body of a message to "Majordomo at efi332.eng.ohio-state.edu".
>
> A non-digest (direct mail) version of this list is also available; to
> subscribe to that instead, replace "diy_efi-digest" in the command
>  above with "diy_efi".