Programming chip

[nacelp]

Usually double enter the bin, so as to use all the eprom
ie if the eprom is a 512, repeat a 256 entry, if 128 enter 4x
Grumpy



> Anyone ever tried using a 27C512 chip in place of a 27C256?  I just read
one
> of my 91 vette chips, created a bin file, programmed it into the 27C512
> chip, read it back and created a bin file, then opened it using the
TunerCat
> software with the $8D calibration file with no problem.  So my question
is,
> as long as I have a chip that is at least as large as necessary to hold
the
> information does it matter what I use?
>
> Dan
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org