April 2000 Archives by author
Starting: Sat Apr 1 00:58:06 GMT 2000
Ending: Sun Apr 30 22:32:46 GMT 2000
Messages: 426
- Free Data Acquisition Starter Kit
Toby Atwater
- Old 486 Board for ECU??
Mike from West Australia
- Old 486 Board for ECU??
Mike from West Australia
- Old 486 Board for ECU??
Mike from West Australia
- Old 486 Board for ECU??
Mike from West Australia
- Old 486 Board for ECU??
Mike from West Australia
- Fuel Damper ?
Mike in West Australia
- '93 Ford EEC-IV
Clay B
- Static electricity and Teflon fuel lines
Clay B
- Static electricity and Teflon fuel lines
Clay B
- Static electricity and Teflon fuel lines
Clay B
- '93 Ford EEC-IV
Clay B
- Fuel pressure sensor
BOWEN, SCOTT M. (JSC-CC)
- Pressure Sensors
BOWEN, SCOTT M. (JSC-CC)
- Shift light?
BOWEN, SCOTT M. (JSC-CC)
- Shift light?
BOWEN, SCOTT M. (JSC-CC)
- HUD RE: Digital dash
BOWEN, SCOTT M. (JSC-CC)
- Intake manifold construction
Stuart Baly
- Still looking for code
Mike Blakey
- Shift light?
Mike Blakey
- Intake manifold construction
Frederic Breitwieser
- Intake manifold construction
Frederic Breitwieser
- Shift light?
Frederic Breitwieser
- Digital dash
Frederic Breitwieser
- Digital dash
Frederic Breitwieser
- Digital dash
Frederic Breitwieser
- Digital dash
Frederic Breitwieser
- Digital dash
Frederic Breitwieser
- Old 486 Board for ECU??
Frederic Breitwieser
- 486 EFI Computer
Frederic Breitwieser
- Felpro Info
C. Brooks
- Free Data Acquisition Starter Kit
C. Brooks
- Faking an O2 sensor
Eric Bryant
- eprom
Todd Burkard
- 87 TPI Fuel Pressure Setting
Todd Burkard
- ONE WIRE O2 TO HEATED O2
Todd Burkard
- cold engine driveability - modify water temp resistance?
Franc Buxton
- cold engine driveability, fuel pressure
Franc Buxton
- cold engine driveability - modify water temp resistance?
Chad
- Ford 5.0 swap
Chad
- Old 486 Board for ECU??
Chad
- Old 486 Board for ECU??
Chad
- Problem with getting off idle with Stock Rover MEMS
Ade + Lamb Chop
- Digital Speedometer
Ade + Lamb Chop
- Problem with getting off idle with Stock Rover MEMS
Ade + Lamb Chop
- Problem with getting off idle with Stock Rover MEMS
Ade + Lamb Chop
- "Faking" an O2 sensor
Ade + Lamb Chop
- New Saab Engine Tech
Ade + Lamb Chop
- New Saab Engine Tech
Ade + Lamb Chop
- Mini Tech - was Re: New Saab Engine Tech
Ade + Lamb Chop
- Shift light?
Ade + Lamb Chop
- New Saab Engine Tech
Ade + Lamb Chop
- Lastest news... possible dodgy TPS?
Ade + Lamb Chop
- Free Data Acquisition Starter Kit
Steven Ciciora
- Fuel pressure sensor
Chris Conlon
- A-B encoder / Still looking for code
Chris Conlon
- Old 486 Board for ECU??
Chris Conlon
- '93 Ford EEC-IV
David Cooley
- MAF sensor impedance
David Cooley
- free schematic software
David Cooley
- GM ECM to run a rotary engine
David Cooley
- Intake manifold construction
Matt Cramer
- Digital dash
Matt Cramer
- Digital dash
Matt Cramer
- Digital dash
Matt Cramer
- Digital dash
Matt Cramer
- Digital dash
Matt Cramer
- Old 486 Board for ECU??
Matt Cramer
- Faking an O2 sensor
Scott Croughwell
- DIY_EFI Digest V5 #150
Scott Croughwell
- C/L WB/WOT OEM ECUs...
Doug Dayson
- Digital Speedometer
Doug Dayson
- New Saab Engine Tech
Doug Dayson
- New Saab Engine Tech
Doug Dayson
- Sorry no efi, National Organ, and tissue awaremess week
Doug Dayson
- Hey Bernd...Fix Your Clock...
Doug Dayson
- free schematic software
Diehl, Jeffrey
- free schematic software
Diehl, Jeffrey
- Old 486 Board for ECU??
Diehl, Jeffrey
- Chrysler Prowler gauges (in an LS1 equipped Prowler)
Shannen Durphey
- EGR temp disable ?
Shannen Durphey
- newbie
Shannen Durphey
- EPROM Eraser not erasing New EPROM
Shannen Durphey
- Fuel Damper ?
Shannen Durphey
- Fuel Damper ?
Shannen Durphey
- SBC 400
Shannen Durphey
- SBC 400
Shannen Durphey
- Shift light?
Shannen Durphey
- Programming chip
Shannen Durphey
- What were they thinking?
Shannen Durphey
- Programming chip
Shannen Durphey
- AED Vehicle Controller Interface and software for sale - calibration equipment
Dave & Irina Eicher
- "Faking" an O2 sensor
Dave & Irina Eicher
- "Faking" an O2 sensor
Dave & Irina Eicher
- Digital dash
Dave & Irina Eicher
- Wideband O2 control
Bernd Felsche
- C/L WB/WOT OEM ECUs...
Bernd Felsche
- Fuel pressure sensor
Bernd Felsche
- Intake manifold construction
Bernd Felsche
- New Saab Engine Tech
Bernd Felsche
- Shift light?
Bernd Felsche
- VIRUS ALERT
Bernd Felsche
- Cheap water injection - Was Aftermarket ECU
Jeff Flanary
- Neutral safety switch
Darren Floen
- Ford 5.0 swap
Darren Floen
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- EPROM Eraser not erasing New EPROM
93 Formula
- C/L WB/WOT OEM ECUs...
the Fredericks
- Digital Speedometer
the Fredericks
- VIRUS ALERT
Gabe
- Subject: Digital Speedometer
Peter Gargano
- EPROM Eraser not erasing New EPROM
Peter Gargano
- "Faking" an O2 sensor
Peter Gargano
- Faking an O2 sensor
Peter Gargano
- Mini Tech - was Re: New Saab Engine Tech
Peter Gargano
- Digital dash
Peter Gargano
- Hey Bernd...Fix Your Clock...
Peter Gargano
- Old 486 Board for ECU??
Peter Gargano
- Shift light?
Gavin
- Shift light?
Gavin
- VIRUS ALERT
Gavin
- Shift light?
Gavin
- Old 486 Board for ECU??
Gavin
- Old 486 Board for ECU??
Gavin
- Old 486 Board for ECU??
Gavin
- Intake manifold construction
Malcolm Gough
- Fuel Damper ?
Christian Hack
- Chrysler Prowler gauges (in an LS1 equipped Prowler)
Jason R. Haines
- Apology for sending diagnostic data file to entire list
Jason R. Haines
- AED Vehicle Controller Interface and software for sale - calibration equipment
Jason R. Haines
- Fuel pressure sensor
Jason R. Haines
- AED Vehicle Controller Interface and software for sale - calibration equipment
Jason R. Haines
- PID control stategy book?
Jason R. Haines
- EPROM Eraser not erasing New EPROM
Jason R. Haines
- EPROM Eraser not erasing New EPROM
Jason R. Haines
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
Jason R. Haines
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
Jason R. Haines
- AED Vehicle Controller Interface and software for sale - calibration equipment
Jason R. Haines
- GM ECM to run a rotary engine
Jason R. Haines
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
Jurgen Hartwig
- Aftermarket ECUs - Followup
Jurgen Hartwig
- Cheap water injection - Was Aftermarket ECU
Jurgen Hartwig
- WOT question
Roger Heflin
- EPROM Eraser not erasing New EPROM
Roger Heflin
- EPROM Eraser not erasing New EPROM
Roger Heflin
- EPROM Eraser not erasing New EPROM
Roger Heflin
- VIRUS ALERT
Roger Heflin
- VIRUS ALERT
Roger Heflin
- Question about BSFC on a fuel injected car.
Roger Heflin
- Question about BSFC on a fuel injected car.
Roger Heflin
- Question about BSFC on a fuel injected car.
Roger Heflin
- PID control stategy book?
Greg Hermann
- Question about BSFC on a fuel injected car.
Greg Hermann
- Affordable Wideband ECUs - How to?
Espen Hilde
- Old 486 Board for ECU??
Peter D. Hipson
- Digital Speedometer
Robert W. Hughes
- Affordable Wideband ECUs - How to?
Jörgen Karlsson
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
Jörgen Karlsson
- Intake manifold construction
Jörgen Karlsson
- Is the old server down?
Jörgen Karlsson
- Blow off valve control
Jörgen Karlsson
- Blow off valve control
Jörgen Karlsson
- MAF sensor impedance
Rodney_L_Wiggins at KeyBank.com
- Aftermarket ECUs - Followup
Phil Lamovie
- EPROM Eraser not erasing New EPROM
Ludis Langens
- FTX binary ?
Ludis Langens
- Old 486 Board for ECU??
Ludis Langens
- GM ECU for Turbo Motorcycle?
Steve Leonard
- C/L WB/WOT OEM ECUs...
Rich M
- Problem with getting off idle with Stock Rover MEMS
Rich M
- Problem with getting off idle with Stock Rover MEMS
Rich M
- DIY-EFI References
Ignacio Paniagua Martinez
- Burn your own chip?
Matthew
- Burn your own chip?
Matthew
- Cheap water injection - Was Aftermarket ECU
Matthew
- OT: Adding a TPS
Matthew
- adding a tps
Matthew
- Shift light?
Matthew
- adding a tps
Matthew
- Fw: MSD sellin Crap Still
Will McGonegal
- FW: POWERFUL LIQUID
Will McGonegal
- 87 TPI Fuel Pressure Setting
A. P. McIlwraith
- 87 TPI Fuel Pressure Setting
A. P. McIlwraith
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
A. P. McIlwraith
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
A. P. McIlwraith
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
A. P. McIlwraith
- Pressure Sensors
A. P. McIlwraith
- 87 TPI Fuel Pressure Setting
Keith Mezzina
- 87 TPI Fuel Pressure Setting
Keith Mezzina
- MAF sensor impedance
Mike (Perth, Western Australia)
- Problem with getting off idle with Stock Rover MEMS
Mike (Perth, Western Australia)
- Fuel pressure sensor
Mike (Perth, Western Australia)
- Fuel Damper ?
Mike (Perth, Western Australia)
- Digital dash
Charles Morgan
- Chrysler Prowler gauges (in an LS1 equipped Prowler)
MysticZ
- Digital Speedometer
MysticZ
- EPROM Eraser not erasing New EPROM
MysticZ
- Fuel pressure sensor
MysticZ
- Fuel pressure sensor
MysticZ
- Intake manifold construction
MysticZ
- Intake manifold construction
MysticZ
- "Faking" an O2 sensor
MysticZ
- "Faking" an O2 sensor
MysticZ
- "Faking" an O2 sensor
MysticZ
- Faking an O2 sensor
MysticZ
- Blow off valve control
MysticZ
- Digital dash
MysticZ
- Old 486 Board for ECU??
MysticZ
- Two New IC's
Orin
- VIRUS ALERT
Orin
- VIRUS ALERT
Orin
- Valve seats
Tom Parker
- Old 486 Board for ECU??
Tom Parker
- Pressure Sensors
Corner Paul
- Subject: Digital Speedometer
Gerald Pelnar
- Old 486 Board for ECU??
Gerald Pelnar
- Two New IC's
Todd Peterson
- None standard blow off valve danger.
Mike Pitts
- 87 TPI Fuel Pressure Setting
Dan Plaskett
- 87 TPI Fuel Pressure Setting
Dan Plaskett
- 87 TPI Fuel Pressure Setting
Dan Plaskett
- Shift light?
Dan Plaskett
- Shift light?
Dan Plaskett
- Programming chip
Dan Plaskett
- What were they thinking?
Dan Plaskett
- What were they thinking?
Dan Plaskett
- Programming chip
Dan Plaskett
- Newbie needs advice
Dan Plaskett
- '93 Ford EEC-IV
Programmer
- '93 Ford EEC-IV
Programmer
- EGR temp disable ?
Programmer
- EGR temp disable ?
Programmer
- EGR temp disable ?
Programmer
- EGR temp disable ?
Programmer
- Fuel pressure sensor
Programmer
- EPROM Eraser not erasing New EPROM
Programmer
- Faking an O2 sensor
Programmer
- FTX binary ?
Programmer
- FTX binary ?
Programmer
- FTX binary ?
Programmer
- Virus alert
Carlo Putter
- FW: POWERFUL LIQUID
Carlo Putter
- EPROM Eraser not erasing New EPROM
Randall
- Old 486 Board for ECU??
Randall
- Old 486 Board for ECU??
Axel Rietschin
- Old 486 Board for ECU??
Axel Rietschin
- cheap water injection
Roy
- Intake manifold construction
Huw Scourfield
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
Huw Scourfield
- ONE WIRE O2 TO HEATED O2
Seth
- Intake manifold construction
Seth
- Intake manifold construction
Seth
- Shift light?
Seth
- Question about BSFC on a fuel injected car.
Seth
- O2 sensor response times- catalyst
Tom Sharpe
- Neutral safety switch
Bill Shaw
- Adding a TPS
Bill Shaw
- TPI bin/ecu - 88iroc
Shawn
- C/L WB/WOT OEM ECUs...
Walter Sherwin
- cold engine driveability, fuel pressure
Carter Shore
- Ford TBI
Carter Shore
- Types of EFI
Socket7
- Old 486 Board for ECU??
Socket7
- Aftermarket Control System.
Tommy P.G. Soder
- is the mail service still inop ? & LS1 heads for sale
Stowe, Ted-SEA
- C/L WB/WOT OEM ECUs...
Carl Summers
- C/L WB/WOT OEM ECUs...
Carl Summers
- EGR temp disable ?
Carl Summers
- EPROM Eraser not erasing New EPROM
Carl Summers
- Faking an O2 sensor
Carl Summers
- Aftermarket ECUs - Followup
Carl Summers
- SBC 400
Carl Summers
- Shift light?
Carl Summers
- What were they thinking?
Carl Summers
- Question about BSFC on a fuel injected car.
Carl Summers
- AED Vehicle Controller Interface and software for sale - calibration equipment
Swayze
- EPROM Eraser not erasing New EPROM
Swayze
- adding a tps
Swayze
- adding a tps
Swayze
- adding a tps
Swayze
- VIRUS ALERT
Swayze
- VIRUS ALERT
Swayze
- Digital dash
Swayze
- Digital dash
Swayze
- Digital dash
Swayze
- Hey Bernd...Fix Your Clock...
TK
- resources for FP Perf SEFI8LO
Andrew Theurer
- Knock detectors & sensitivity
Barry Tisdale
- Shift light?
Barry Tisdale
- Old 486 Board for ECU??
Barry Tisdale
- WOT question
Bob Tom
- Chrysler Prowler gauges (in an LS1 equipped Prowler)
Bob Tom
- C/L WB/WOT OEM ECUs...
Bob Tom
- C/L WB/WOT OEM ECUs...
Bob Tom
- TPS questions
Bob Tom
- DIY_EFI Digest V5 #155
Lee Tumbleson
- Digital dash
Joe Vitek
- Digital Speedometer
Vitek, Joseph
- PID control stategy book?
Jay Wallace
- Intake manifold construction
Sean W Walsh
- 87 TPI Fuel Pressure Setting
Nic van der Walt
- Pressure Sensors
Rex Weatherford
- Shift light?
Rex Weatherford
- EPROM Eraser not erasing New EPROM
Donald Whisnant
- C/L WB/WOT OEM ECUs...
Merethe Wichstroem
- Ford 5.0 swap
Chris Wilkinson
- Digital Speedometer
Dave Williams
- Old 486 Board for ECU??
Dave Williams
- Affordable Wideband ECUs - How to?
Garfield Willis
- Affordable Wideband ECUs - How to?
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- C/L WB/WOT OEM ECUs...
Garfield Willis
- O2 sensor response times
Garfield Willis
- Blow off valve control
Chris Wilson
- Blow off valve control
Chris Wilson
- Blow off valve control
Chris Wilson
- None standard blow off valve danger.
Chris Wilson
- None standard blow off valve danger.
Chris Wilson
- "Faking" an O2 sensor
Jim Yeagley
- data logger files - software to read them
alexpeper
- Holley Pro-Jection
Chrisharon at aol.com
- newbie
DarthOlds at aol.com
- Injector Angle
DarthOlds at aol.com
- Pressure Sensors
ECMnut at aol.com
- '93 Ford EEC-IV
clayb
- Aftermarket ECUs - Followup
clayb
- 87 TPI Fuel Pressure Setting
dzorde at erggroup.com
- DIY_EFI Digest V5 #150
dzorde at erggroup.com
- SBC 400
dzorde at erggroup.com
- SBC 400
dzorde at erggroup.com
- SBC 400
dzorde at erggroup.com
- Old 486 Board for ECU??
gazza836
- Ford 5.0 swap
grobbins
- Digital Speedometer
cwagner at info2000.net
- Newbie needs advice
akallotte at juno.com
- Digital Speedometer
Rodney_L_Wiggins at keybank.com
- Blow-off valve control
Rodney_L_Wiggins at keybank.com
- Cheap water injection - Was Aftermarket ECU
mark koenig
- Digital dash
mark koenig
- Ion current sensing -> spark advance
mike mager
- DIY_EFI Digest V5 #131
mike mager
- C/L WB/WOT OEM ECUs...
mike mager
- C/L WB/WOT OEM ECUs...
mike mager
- C/L WB/WOT OEM ECUs...
mike mager
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
mike mager
- EPROM Eraser not erasing New EPROM
mike mager
- EPROM Eraser not erasing New EPROM
mike mager
- EPROM Eraser not erasing New EPROM
mike mager
- Intake manifold construction
mike mager
- unsubscribing
mike mager
- cold engine driveability - modify water temp resistance?
Aribert_Neumann at magna.on.ca
- Fw: MSD sellin Crap Still
nacelp
- Static electricity and Teflon fuel lines
nacelp
- Static electricity and Teflon fuel lines
nacelp
- Neutral safety switch
nacelp
- eprom
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- 87 TPI Fuel Pressure Setting
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- GM ECU for Turbo Motorcycle?
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- Felpro Info
nacelp
- C/L WB/WOT OEM ECUs...
nacelp
- EGR temp disable ?
nacelp
- EGR temp disable ?
nacelp
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
nacelp
- Aftermarket ECUs. Haltech, Wolf EMS, SDS
nacelp
- "Faking" an O2 sensor
nacelp
- "Faking" an O2 sensor
nacelp
- Faking an O2 sensor
nacelp
- Pressure Sensors
nacelp
- New Saab Engine Tech
nacelp
- Pressure Sensors
nacelp
- SBC 400
nacelp
- SBC 400
nacelp
- New Saab Engine Tech
nacelp
- POW WOW tenitive date
nacelp
- Mini Tech -
nacelp
- Shift light?
nacelp
- FTX binary ?
nacelp
- Sorry no efi, National Organ, and tissue awaremess week
nacelp
- Programming chip
nacelp
- What were they thinking?
nacelp
- FTX binary ?
nacelp
- Newbie needs advice
nacelp
- Newbie needs advice
nacelp
- Blow off valve comments
nacelp
- Question about BSFC on a fuel injected car.
nacelp
- None standard blow off valve danger.
nacelp
- GM ECM to run a rotary engine
nacelp
- Injector Angle
nacelp
- Holley Pro-Jection
nacelp
- Old 486 Board for ECU??
nacelp
- free schematic software
steve ravet
- free schematic software
steve ravet
- Intake manifold construction
steve ravet
- EPROM Eraser not erasing New EPROM
steve ravet
- EPROM Eraser not erasing New EPROM
steve ravet
- New Saab Engine Tech
steve ravet
- Burn your own chip?
steve ravet
- Digital dash
steve ravet
- EGR temp disable ?
rr
- Updated '747 ignition info
rr
- Fuel pressure sensor
rr
- Fuel Damper ?
rr
- malpasi
yaron
Last message date:
Sun Apr 30 22:32:46 GMT 2000
Archived on: Thu May 30 05:57:51 GMT 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).