Fuel pressure sensor

Programmer nwester at eidnet.org
Fri Apr 14 05:27:46 GMT 2000


It's a pressure transducer kit which hooks up to the SnapON
"Vantage"--a graphing multimeter. Doesn't integrate with the scan tool.

Lyndon.
-----Original Message-----
From: Jason R. Haines <jhaines at lingenfelter.com>
To: diy_efi at diy-efi.org <diy_efi at diy-efi.org>
Date: April 13, 2000 11:19 AM
Subject: Re: Fuel pressure sensor


>What kind of accuracy and cost are you looking for in a sensor? Do you need
>current output, voltage output or what? Omega ( http://www.omega.com ) has
>some sensors in the $225 and up range. We use a 0 to 100 psi, 8 to 30 Vdc
>input, 0 to 10 Vdc output sensor on one of our engine dynamometer cells and
>on our chassis dynamometer.
>
>I am told Snap-On sells a sensor that is compatible with their scan tool
(so
>you can record ECM data and fuel pressure.
>
>Jason
>jhaines at mail.fwi.com
>
>----- Original Message -----
>From: "MysticZ" <lt1_z28 at houston-f-body.org>
>To: <diy_efi at diy-efi.org>
>Sent: Thursday, April 13, 2000 2:14 AM
>Subject: Fuel pressure sensor
>
>
>> I'm working on a little project as another stepping stone to a much
>> larger project and need a part. Anyone know where to get a fuel pressure
>> sensor? I've seen a few fuel pressure switches, but no variable sensors.
>> I need a 100 psi range, also. Last thing, does anyone know the thread on
>> GM fuel pressure test ports? I had a fitting around here somewhere but
>> it vanished.
>> --
>> Steve
>> 97 Chevy Camaro Z28, Mystic teal, A4, not stock
>> 90 Kawasaki EX500A4, black, M6, not even CLOSE to stock!
>> lt1_z28 at ev1.net  http://users.ev1.net/~lt1_z28
>> Aluminum, steel, carbon fiber, titanium, and two cast iron balls.
>> McMillan Motorsports- http://www.mmsbikes.com
>> -------------------------------------------------------------------------
-
>--
>> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
>quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>>
>>
>
>---------------------------------------------------------------------------
-
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list