87 TPI Fuel Pressure Setting

[Keith Mezzina]

Hey, thanks for the formula, Dan!

On Mon, 10 Apr 2000 15:37:45 -0500, "Dan Plaskett" <dynastydan at worldnet.att.net>
wrote:

>I thought that originally too, but when you apply the formula for flow rate
>with increased fuel pressure it works out to 20.88lb/hr.
>
>Just in case you're wondering the formula is the square root of (P2/P1) x Q1
>where
>    P1=Original fuel pressure
>    P2=New fuel pressure
>    Q1=Original fuel flow rate
>
>Divide P2 by P1 first, then take the square root of that number, then
>multiply by Q1
>
>Dan Plaskett

- - - - - -
1973 Dodge Challenger (340/727/3.91SG/NOS) 13.01 @ 105 / 12.2 @ 112 (NOS)
1985 Z-28 Backhalf Race car (356/TH400/5.56)
1986 Dodge Ram 2X4 Pickup (440/727/3.55) (Daily Beater)
Homepage: http://www.checkmateracing.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org