Static electricity and Teflon fuel lines

[nacelp]

??.
Stock neopreme, isn't conductive.
The SS part about quarantees that there will be no static.
Why Teflon, anyway?.  I've used neo., just fine.
Grumpy


> I've heard this is something to be concerned with? Is it? I was planning
> on running -8 Teflon SS braided hose on the inlet side, from both aluminum
> tanks, and -6 for the return lines. The tank pickup and return tubes
> extend to the bottom of the tanks, no static generation there. Also, the
> tanks, rails, and engine are grounded together.
>
> Do I need "electrically continuous" fuel line? Is static generation from
> the fuel flowing past the teflon a safety concern? Am I going to blow
> myself up if I don't use the electrically continuous fuel line?   :)
>
> - Clay
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org