EGR temp disable ?

[Carl Summers]

The temp correlation is inverted....I usually use 10hex....which is like
240F..hth's
-Carl Summers


-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Programmer
Sent: Tuesday, April 11, 2000 12:42 PM
To: diy_efi at diy-efi.org
Subject: Re: EGR temp disable ?


Do you mean substitute that value at that location, or look at programming
101 ? Already downloaded the most "current"
edition from ECM guys page (nice job BTW). I'm starting to think
that location is incorrect...it doesn't appear to be EGR related at least.

LW
-----Original Message-----
From: nacelp <nacelp at bright.net>
To: diy_efi at diy-efi.org <diy_efi at diy-efi.org>
Date: April 11, 2000 11:29 AM
Subject: Re: EGR temp disable ?


>
>try 01, Been awhile since played with a 747 but I was thinking there is
>something loony about one of the locations.  There were several other
>options I think ie TPS, VSS.
>Grumpy
>
>
>> This is probably old news, but is $01b3 truly the EGR enable
>> temp on the 7747? I've tried everything except 255 (FF)at that local, and
>it
>> doesn't disable EGR. I'm just surmizing that raising the temp isn't
>> enough...
>>
>> LW.
>>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org