87 TPI Fuel Pressure Setting

[Dan Plaskett]

The 5.0 (305) injectors are 19lb/hr @ 36psi.  The 5.7 (350)  injectors are
22lb/hr @ 43.5psi

Dan Plaskett

----- Original Message -----
From: "Todd Burkard" <toddburkard at pcmc.com>
To: "<" <diy_efi at diy-efi.org>
Sent: Saturday, April 08, 2000 9:57 AM
Subject: 87 TPI Fuel Pressure Setting


> Does anyone know the Stock fuel pressure setting on a 87 Iroc With a 305
TPI motor I put a adjustable fuel pressure Regulator on and it is running a
little Fat. I needed to increase the fuel pressure to compensate for the
increase from a 305 to a 327 but I bought the system in parts and I put the
Adjustable regulator on as I was putting it together and none of my manuals
gives a setting so I set it at about 50 PSI to start. Even some formulas for
calculating what it would be would be fine I have a Big Calculator ;)
>
> I am in the process of coming up with a new Chip for it and another
project (Can never have just one going) but I need to figure out the chip
stuff first, but any suggestions on what to add there also would be fine.
>
> Thanks,
> Todd
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org