ONE WIRE O2 TO HEATED O2

[Seth]

someone correct me if I am wrong, but if you just drop in a 3 wire and
supply 12v to the heater wires, you should be all set.  Someone poster
earlier that the heater wires are usually the same color, while the
sensor wire is a different color.

-Seth

Todd Burkard wrote:
> 
> Just a quick question. Has anyone converted the one wire O2 Sensor in their GM EFI system to Heated O2 design I having a problem with going into open loop when I come to a stop because the O2 cools off to much being in my Header and I can't move it anyplace else. If you have could you give me a little insight on what it entails.
> 
> Thanks,
> Todd
> 
> To many projects to little time :)
> 
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org