Fuel Damper ?

[Mike in West Australia]

At 09:32 AM 16/4/2000 -0400, rr <RRauscher at nni.com> wrote:
>"The fuel pulse dampener is installed between the fuel pump
>and the fuel sender assembly feed pipe to dampen fuel pulsation
>and reduce noise generated by the fuel pump. The fuel pulse
>dampener is used with the roller vane fuel pumps only." (p.6C-4)

mmm - I have a low pressure pump in tank, high prssure outside tank,
leading to damper then fuel filter and loonnnggg pipe to from of car.

I would have thought any relatively high speed noise from the pump
(given its rpm) would have been damped out by the pipes and sections of
flexible hose...

I suppose I could always get a stetch limo and reduce the fuel noise
that way as it would have a veeerryy looonggg fuel pipe ;-)

Rgds

Mike
Suppose I could take it out and see what happens,,,

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org