ZIF Sockets

[bcroe at juno.com]

I have a bunch of 28 pin by 600 mil Zero Insertion Force
Sockets I could let go for shipping.  These have an end to end
slider control sticking out the ends, instead of a lever on the 
side (AMP 54502-2).  Bruce Roe, 2375 Parkview, Aurora, IL 60504


> The ZIFs "Generally" need to be the long pigtail version to work in 
> a 165
> with the mid case access door they are a little bit of a pain to 
> work with.
> I have a 165 minus case that I use when doing 165 work, since I 
> screwed up
> the ZIF mounting not paying attention  to the case, the 730 was a no
> brainer.
> BTW, you'll want and IDE header, so that when you have the perfect 
> chip,
> then you can use that to write a finished memcal.
> Grumpy
>  
> What I
> would
> > like to do is modify my extra calpak by removing the EPROM and 
> replacing
> > with a ZIF socket.  This seems to me to the easiest way to swap 
> chips.
> That
> > way I can buy 10 or so 27C128 chips with out having to erase one 
> at a
> time.
> >
> > What adapter part number do I need?
> >
> > Thanks

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org