ZIF Sockets

[JN]

----- Original Message -----
From: <bcroe at juno.com>
To: <diy_efi at diy-efi.org>
Sent: Thursday, August 10, 2000 7:12 PM
Subject: ZIF Sockets


> I have a bunch of 28 pin by 600 mil Zero Insertion Force
> Sockets I could let go for shipping.  These have an end to end
> slider control sticking out the ends, instead of a lever on the
> side (AMP 54502-2).  Bruce Roe, 2375 Parkview, Aurora, IL 60504
>
>
> > The ZIFs "Generally" need to be the long pigtail version to work in
> > a 165
> > with the mid case access door they are a little bit of a pain to
> > work with.
> > I have a 165 minus case that I use when doing 165 work, since I
> > screwed up
> > the ZIF mounting not paying attention  to the case, the 730 was a no
> > brainer.
> > BTW, you'll want and IDE header, so that when you have the perfect
> > chip,
> > then you can use that to write a finished memcal.
> > Grumpy
> >
> > What I
> > would
> > > like to do is modify my extra calpak by removing the EPROM and
> > replacing
> > > with a ZIF socket.  This seems to me to the easiest way to swap
> > chips.
> > That
> > > way I can buy 10 or so 27C128 chips with out having to erase one
> > at a
> > time.
> > >
> > > What adapter part number do I need?
> > >
> > > Thanks
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org