What's up with this list?

[JN]

Sorry to all on this list about my ranting on Sat.  I realized that I was
posting my questions to the wrong list.  I feel so embarrassed.  Anyway,
thank you for your Reponses and good luck with your projects.

Jason Norris
----- Original Message -----
From: <Shannen at grolen.com>
To: <diy_efi at diy-efi.org>
Sent: Saturday, August 12, 2000 11:58 AM
Subject: What's up with this list?


> DFor larger injectors, reset the injector constant.
> I think you are having a bad day.  Patience is a virtue, you should have
> it for this type of work.  Too many changes too fast can lead to
> trouble.
> Shannen
> I>I have posted a couple questions about the relationship between block
learn
> DI>cell numbers and MAF tables.  Car is an 89 Corvette.  Actually I posted
the
> DI>same question twice and have not had even one response.  I don't
understand
> DI>this.  I educated myself as much as I could before joining looking at
> DI>archives and reading programming 101 and Bruce Plecans tuning tips.
More of
> DI>you people seem to be working on speed density systems and not MAF
systems.
> DI>If anyone would be willing to answer a few simple basic questions for
me it
> DI>would be appreciated.  I am not going to ask tuning advise.  I can
figure
> DI>that part out on my own.  I do however need guidance on some of the
tables
> DI>and what they control.
>
> DI>For instance:  I have the GMEPro software.  There are 6 MAF tables and
a
> DI>scaler for each table.  What do these affect?  It seems by changing the
> DI>scaler you can affect the entire table.  The constants are listed as
counts.
> DI>Counts?  What is meant by counts?
>
> DI>Second, Say when I build my 383 and install 30 lb injectors.  My closed
open
> DI>loop idle will be way rich.  How do I reduce IPW at idle with the
bigger
> DI>injectors?
>
> DI>These questions don't seem too off the wall for this list.  Anyone out
there
> DI>willing to help?  Not everyone can start out as an expert.  Am I just
having
> DI>a bad day?
>
> DI>Jason Norris
> DI>89 Vette, Eager to Learn, Looking for help
>
>
DI>-------------------------------------------------------------------------
---
> DI>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> DI>in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org