Partial success - take 2

[Jorgen Karlsson]

> 7.  I'm running a MAP system.  The multiple BOV set-up could be feasible
> but seems messy.

I think that a single ATR BOV can a lot more flow then you need, the top
sense line broke on mine, making the valve open. After that I could not make
any boost above the differential pressure on the BOV, this was around
.15bar. From memory the valve are 40-45mm, same diameter on the outlet. It
is not as noisy as most others either.

Jorgen


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org