Ignition

[Rich M]

also try:
http://catalog.tycoelectronics.com/AMP/bin/AMP.Connect?C=1&M=BYPN&I=13&PN=92
6756-1

http://catalog.tycoelectronics.com/AMP/bin/AMP.Connect?C=1&M=BYPN&I=13&PN=92
5597-1

If I'm way off here, please stop me!!!

Rich


> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Rich M
> Sent: 11 December 2000 15:14
> To: diy_efi at diy-efi.org
> Subject: RE: Ignition
>
>
> I'd guess that these are the AMP 'Junior Timer' or 'Junior Power Timer'
> range - either 5-way or 7-way connector, pins in the module are 2.8mm x
> 0.8mm, pitch approx. 5mm??
> If this is so, the female terminals in the vehicle harness connector will
> have one of two styles: if the terminal is split to give it effectively 4
> leafs, it is a 'Junior Timer', if the terminal has just 2 leafs, it is
> 'Junior Power Timer'.
> The AMP site is a bit of a fight (now under the Tyco banner), but
> here are a
> couple of links that might be worth a look to see if it sheds any light:
>
>
> http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&LG
> =1&I=13&PN
> =927771-3&button.x=47&button.y=17
>
> http://catalog.tycoelectronics.com/AMP/docs/pdf/5/83/189385.pdf
>
> http://catalog.tycoelectronics.com/AMP/docs/pdf/8/88/194888.pdf
>
> Although the JT and JPT range will both mate with the modules,
> the terminals
> are not interchangeable between the two housings of the different types.
>
> Hope this helps.
>
> Rich
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org