finally got my EFI package:-) what's best bang/buck pump??

[Rob O]

The TT Supra pump is good for about 450-475 RWHP from the factory and
they're available here in the states for under $200. Walbro pumps are
cheaper and also flow very well but their durability has been questioned
more than once. YMMV of course

Other pumps known to flow very well are 93+ RX-7, 300ZX TT, 3000GT VR4
but they are know to be costly.

Rob_O 

Ross Corrigan wrote:
> 
> Well, had to share I finally got my EFI setup I ultimately wanted (within
> reason)
> http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=521638598&
> r=0&t=0
> in a finicky finish the edelbrock 3500 'retro' sbc V8 setup.
> 
> it's not coming with a fuel pump so I'd like to know what the best
> bang/buck fuel pump will be to replace my current 'carbie' pump?  I sent a
> post to some Z friends to see what a stock 280ZX pump will support as I
> know they're v. good but not sure they're good enough to support 450max
> flywheel hp at 6500rpm.  If 'that' pump is pricey I'll take one that will
> do 400/6000 meantime till I finish this degree and get back to working.  I
> can get 280ZX and 300ZX fuel pumps fairly cheap used and rest at jobber
> prices.
> 
> thanks in advance for any info...
> Ross Corrigan  /  Vancouver, Canada
> 
> Of all the things I've lost I miss my mind the most.
> 
> mailto:280zx at home.com      ICQ # 11549358
> http://207.212.212.139/~corrigan/gearheads/pics/wheels/sirbg.jpg    where a
> Z belongs
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org