Mass airflow sensors.

[Espen Hilde]

Hi!
http://www.autospeed.com/ had an article on about the same thing as you 
try to do. They used 2 pots to scale the new bigger MAF with bigger
injectors to the car.If you just made the sampling part of the MAF into
a bigger tube ......or create a leak.(Just guessing here:-))
I would put the orginal injectors back and you have as you have stated an
advanced setup for emisions and consumption.
just buy an Haltec efi controller and use it to drive the other set of
injectors
you have .Haltec is easy to use and you can start deliver at 0,2 bar.
It wont take care of the timing , thats where the horses are hiding.
Espen 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org