Aspin engine

[Laura & Neil]

> Date: Mon, 31 Jan 2000 10:13:36 -0700
> From: bearbvd at cmn.net (Greg Hermann)
> Subject: Re: Aspin engine
>
> >Check on the web for the Aspin engine.
> >It used a rotating cone arrangement for a combustion chamber, with a hole
> >cut in the
> >cone that aligned with first the inlet then the exhaust at half crank RPM.
> >From what
> >I remember it gave a near perfect stratification to the intake charge with low
> >emmissions and excellent fuel consumption. Only problem was sealing the cone.
> >
> >Neil
> >
> You slip the word "ONLY" in there so casually, Neil!
>
> Done the way an investment banker trying to sell stock in the thing would
> do it!! :-)
>
> Greg
>

Lets face it Greg.
My knowledge of practical physics and engineering, is probably comparable to Mozart's
knowledge of bricklaying.


Neil



----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org