J.C. Whitney AFR meter

[Greg Hermann]

>
>Basically.  The LM3914 uses 1.2v as the reference (full scale), I assume the
>Whitney meter does the same.  I believe the EGO sensor output is basically
>meaningless above about 0.9v.
>
It is also basically meaningless if you are more than about 0.4 A/F ratio
away from stoich!

Greg


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org