Looking for pulse output MAF

[Keith Mezzina]

I have a Bosch hot-wire unit from a GM TPI setup if anyone needs it. It's a used
part but worked just fine. Yours for the cost of shipping.  

Numbers on the part are:
0280 213 004
  14 094 712

On Tue, 28 Mar 2000 20:53:55 -0600, "Brian Franchuk" <franchuk at mm.com> wrote:

>Hi,
>
>I'm looking for a GM MAF (pulse output) that can handle the flow 
>from a 4.0 liter motor (approx 220hp).  I've already built the pulse to 
>AFM conversion box so I need to use a pulsed sensor.  The sensor 
>I've got now (I got it from the U-pull-R yard out of a 2.8l chevy) can't 
>handle the flow rate.  Any help is appreciated.
>
>Brian
>
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

- - - - - -
1973 Dodge Challenger (340/727/3.91SG/NOS) 13.01 @ 105 / 12.2 @ 112 (NOS)
1985 Z-28 Backhalf Race car (356/TH400/5.56)
1977 Suburban (Daily Beater)
Homepage: http://www.checkmateracing.com
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org